Sodium perchlorate (monohydrate) Properties:
Sodium perchlorate monohydrate is an inorganic compound with the chemical formula NaClO4•H2O. It usually also refers to sodium perchlorate monohydrate, sodium perchlorate, sodium perchlorate, etc. It is a white crystal with hygroscopicity, decomposing at approximately 130℃. It is readily soluble in water, soluble in ethanol and acetone, and insoluble in ether. Relative density: 2.02. It has oxidizing properties. Friction or impact with organic substances can cause combustion or explosion, and contact with concentrated sulfuric acid can also cause an explosion. Low toxicity, irritating. It needs to be stored in a sealed and dry container.
Sodium perchlorate (monohydrate) uses:
Sodium perchlorate monohydrate is widely used in the preparation of other chlorates.
It is also used as an oxidizing agent for material handling and gunpowder manufacturing.
In chemical research, it can be used as an analytical reagent and catalyst.
Safety information of sodium perchlorate (monohydrate) :
Sodium perchlorate monohydrate is irritating and may cause harm to the skin, eyes and respiratory system upon contact. Appropriate personal protective equipment, such as gloves, glasses and masks, should be worn.
- Skin contact: Remove contaminated clothing and thoroughly wash the skin with soapy water and clean water for 20 to 30 minutes. If you feel unwell, seek medical attention.
Eye contact: Lift the eyelids and rinse with running water or physiological saline for 15 to 20 minutes. If you feel unwell, seek medical attention.
- Inhalation: Quickly move to a place with fresh air. Keep the airway unobstructed. If breathing is difficult, administer oxygen. If breathing and heartbeat stop, immediately perform cardiopulmonary resuscitation and seek medical attention.
